Creative Micro Systems is a Load(of Sh!t)man

Oh boy! Here we go again! I got laid off from another small company trying to act like a BIG company:

Creative Microsystems, they build on-board truck scales. Loadman is the name of the product.

BOY! Is it ever a LOAD man, a load of s**t!

My job was to build the arm and fork boxes that record the weight of the dumpster that the truck picks up, also I have to build the cables to go with this system, the person next to me builds the meters that the arm and fork, record the weight information too.

When I started there, my trainer, a few months later he quit to go be an electrician, well with the 4 months training I got I took it and tried my best to fill his shoes.

Mind you I was hired as an assembler, not a technician to make this stuff work.

Anyway, I thought that Chris was my supervisor, I could not find him in the company for five mins. to ask him a question on when I got stuck, so I went to the next person up, Larry, his attitude was “why are you bothering me with this?”, I guessed that your supposed to figure this stuff out yourself… ok, with no training manual or accurate diagram of the boards on question, I plowed on the best I could, with no guidance, but a drawn up book I made myself from some old notes of which that book vanished.

2 people came and went of who I trained of what I was given the material to work with…. are you dear reader confused yet?

so then we got a 3rd person in, Peg, I trained her up to what material I had, in fact I made a copy of my book to give to her (mistake on my part never should have copied that book! I did that at Newton, once that got their “training manual” they terminated me) She went ahead and built the arm boxes and the fork boxes, she said she would build the arms if I would build the forks that they were too hard.

Sounds ok, she was having as many if not more problems with the forks, that I was having problems with, also I was building the cables, and putting together manuals on how this stuff works. Also I had to test the boxes, before we potted them.

With the potting material, some times you get a bad bach, well most of them were bad of which I made the stuff work, but wrote a note that the material was bad.

No help there.

Pegs and my work was shipped, my forks were fine, pegs arms were having problems, and came back, who got the blame? ME! Not Peg oh no, she would get upset don’t do that, blame someone who did not build that arm.

Now before you accuse me, I watched her like a hawk to see what she was doing right and wrong before we potted the arm box. They worked like a charm! And so did my work!

SHIP IT!

The installers must have messed some thing up bad out there, the stuff failed in the field, who got the blame? ME!

Because I got laid off was because of the problems with the fork boards (I got no help with them) Chris all he could do was give me a smarmy smirk and say some thing negative to “help me”

IE: I asked him “Could you please print me a few labels”, “I gave you those yesterday”, “let me look… no none here”, “If I have time I will otherwise I do not, ask Larry”

Nice huh?

There is lots more, but I won’t get into it

So I am laid off, and the production person they have left, cannot lift 50 lbs+ to build the cables, she is fragile, and she claims that she was hired as a assembler not a technician. I am in the same boat. they wanted an assembler. well the unemployment just shot up to 10.2% Thanks to Chris at CMS, HAPPY?

VN:F [1.9.22_1171]
Rating: 4.2/5 (5 votes cast)
VN:F [1.9.22_1171]
Rating: -3 (from 15 votes)
Creative Micro Systems is a Load(of Sh!t)man, 4.2 out of 5 based on 5 ratings

This post was submitted by MFX.


Leave a Reply


Warning: Unknown: open(/home/content/37/3530237/tmp/sess_8fgihe37raor41liq9dgf6t473, O_RDWR) failed: No such file or directory (2) in Unknown on line 0

Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct () in Unknown on line 0